На другом языке
How Wide Should the Strips Be for the Second Glue-Up?
The crosscut width of each slice becomes the thickness of the finished board. Here is the allowance to add on top of it, and how to size the first panel around it.
Читать статьюТег: milling
Все статьиНа другом языке
Kerf and Allowances: Why Your Board Comes Out Narrower Than the Drawing
Every cut eats an eighth of an inch. On a 24-strip board that adds up to a few inches of loss. Here is how to budget for it before the finished panel surprises you.
Читать статью