На другом языке
How Much Waste Should I Budget for Kerf and Milling?
Budget 55 percent waste on an end grain board: kerf takes 12 to 15 percent, milling and trimming take the rest. Here is the number behind every step.
Читать статьюТег: material
Все статьиНа другом языке
How Much Wood (Board Feet) Do I Need for a 12x16 End Grain Board?
A 12x16x1.5 inch end grain board holds 2 board feet of wood and takes about 5 board feet of rough 8/4 to build. Here is where every lost inch goes.
Читать статьюНа другом языке
Kerf and Allowances: Why Your Board Comes Out Narrower Than the Drawing
Every cut eats an eighth of an inch. On a 24-strip board that adds up to a few inches of loss. Here is how to budget for it before the finished panel surprises you.
Читать статьюНа другом языке
Choosing Wood Species for an End-Grain Board: What Glues, What Moves, What You Cannot Eat Off
Not every attractive hardwood belongs on a cutting surface. Density, shrinkage and species compatibility across a glue line, and which woods to leave off a kitchen board entirely.
Читать статью